SIT Learn
SIT Learn

Overview

It is essential for fire safety and risk management personnel to understand the principles of fires and explosions in order to determine how fires start and spread, and how explosions occur. Basic knowledge of hazardous area classification is also vital to enabling proper selection and installation of equipment to be used safely in hazardous environments.

In this 2-day Process Safety workshop on Fire and Explosion Prevention, you will acquire comprehensive knowledge on the causes and properties of explosions, with an emphasis on those involving gases. Through this workshop, you will:

  • Discover how mechanical and system failures contribute to major accidents
  • Learn about common fire detectors, alarm systems and procedures
  • Understand the purpose of classifying hazardous areas, materials and temperature
  • Understand equipment protection plans
 

Modular Certification Courses

This module can also be taken as part of:


Speakers / Trainers

What You’ll Learn

  • Expanded fire triangle
  • Fire and explosion hazard assessment
  • Hazardous area classification standards
  • Materials and temperature classification
  • How to carry out hazardous classification
  • Consequences of poor hazardous area zone classification
  • Types of explosion protection and prevention methods for electrical equipment
  • Equipment protection levels (EPLs)
  • ATEX guidelines: equipment markings and enclosure types
  • Fire and gas detection systems engineering

Who Should Attend

Managers, engineers, operators, safety advisors and risk management practitioners

 

Certificate and Assessment

A Certificate of Participation will be issued to participants who
  • Attend 75% of the workshop.
  • Sit for short quizzes during the workshop

A Certificate of Attainment will be issued to participants who:
  • Attend 75% of the module, and
  • Sit for short quizzes during the workshop, and
  • Within 2 months of workshop, submit a written portfolio (write-up on how the participant is able to apply the materials taught in their work)

Participants who successfully obtain all 8 Certificate of Attainment in the Process Safety series will receive an SIT Specialist Certificate in Process Safety.

 

Continuing Professional Development

This workshop is eligible for the following continuing professional development units:

Schedule

Date Duration Venue
21 – 22 Mar 2019 2 day SIT@Dover, 10 Dover Drive, Singapore 138683

Fees

Category Full Fee After SF Funding After SF Mid-Career
Enhanced Subsidy
Singapore Citizen (Below 40) / Singapore PR $1,712.00 $513.60 Not Eligible
Singapore Citizen (40 & above) $1,712.00 $513.60 $193.60
Non-Singaporeans $1,712.00 Not Eligible Not Eligible

When applying for this course, in the "Remarks" field, please:
  • Inform us if you are a registered Workplace Safety and Health Officer (WSHO) to claim SDUs.
  • Provide your PE registration number if you are a Professional Engineer to claim PDUs.

Note:
  • All figures include GST. GST applies to individuals and Singapore-registered companies.
  • You can opt for either SF Series Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.

» Learn more about funding types available

Terms & Conditions:

SkillsFuture Funding


In order to be eligible for the 70% training grant awarded by SkillsFuture, applicants (and/or their sponsoring organisations where applicable) must:
  1.  Be a Singaporean Citizen or Singapore Permanent Resident
  2.  Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SkillsFuture Mid-Career Enhanced Subsidy

To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1.  Be a Singaporean Citizen
  2.  Be at least 40 years old
  3.  Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.

 

What Past Participants Say

“It was good as it provided many additional safety design standards that I was not familiar”
Lee Han Ping, R&I Specialist, Pfizer

"Relevant to my scope of work."
Nor Haslin Mazlan, E&I Specialist, Pfizer


SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.

Key Info

Venue SIT@Dover, 10 Dover Drive S138683
Time 08:30 AM to 05:30 PM
Date 21 Mar 2019 (Thu) to
22 Mar 2019 (Fri)
Registration is Closed.

You May Also Like