Overview

There is increasing emphasis on the importance of managing human factors to achieve improved safety in process industries. This is a multidisciplinary science that focuses on:
  • Interactions between humans and the work system
  • Designing human–machine interactions that optimise human and system performance

Human factors engineering (HFE) is about making it easy for people to do things right and difficult for them to do things wrong.

Major accidents have highlighted the importance of addressing this aspect of performance, e.g. wrong operator response, slow response and incorrect diagnosis.

Teaching Team

What You’ll Learn

  • Aims and benefits of HFE
  • Aims and benefits of HFE
  • HFE and behavioural-based safety (BBS)
  • HFE and process safety
  • Conceptual model

Who Should Attend

Managers, engineers, operators, safety advisors and risk management practitioners

 

SITizens Learning Credits (SLC) - Eligible Course

SIT Alumni: Before registering for courses, please activate your SITizens Learning Credits via the email sent by SIT Alumni Team, on behalf of SITLEARN Professional Development.

CLICK HERE TO APPLY (For SIT Alumni only)

 

Certificate and Assessment

A Certificate of Participation will be issued to participants who
  • Attend 75% of the workshop; and
  • Sit for short quizzes during the workshop

A Certificate of Attainment will be issued to participants who:
  • Attend 75% of the workshop; and
  • Sit for short quizzes during the workshop; and
  • Submit a written portfolio within 1 month of the workshop (write-up on how the participant is able to apply the materials taught in their work)

Participants who successfully obtain all 8 Certificate of Attainment in the Process Safety series will receive an SIT Specialist Certificate in Process Safety.
 

Continuing Professional Development

This workshop is eligible for the following continuing professional development units:

Schedule

Duration Venue
2-day SIT@Dover, 10 Dover Drive S138683

Fees

Category Full Fee After SF Funding
Singapore Citizen (Below 40) / Singapore PR $1,712.00 $513.60
Singapore Citizen (40 & above) $1,712.00 $193.60
Non-Singaporeans $1,712.00 Not Eligible

When applying for this course, in the "Remarks" field, please:
  • Inform us if you are a registered Workplace Safety and Health Officer (WSHO) to claim SDUs.
  • Provide your PE registration number if you are a Professional Engineer to claim PDUs.

Note:
  • All figures include GST. GST applies to individuals and Singapore-registered companies.
  • You can opt for either SkillsFuture Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.

» Learn more about funding types available

Terms & Conditions:

SkillsFuture Funding

To be eligible for the 70% training grant awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1. Be a Singaporean Citizen or Singapore Permanent Resident
  2. Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SkillsFuture Mid-Career Enhanced Subsidy

To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1. Be a Singaporean Citizen
  2. Be at least 40 years old
  3. Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.

SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.
 

What Past Participants Say

“It was good as it provided many additional safety design standards that I was not familiar”
Lee Han Ping, R&I Specialist, Pfizer

"Relevant to my scope of work."
Nor Haslin Mazlan, E&I Specialist, Pfizer
 

Course Series

These modules are stackable towards a Specialist Certificate in Process Safety or can be taken individually as a single module as follows:

PS Workshop 1: PHE3019A Process Safety Concepts
PS Workshop 2: PHE3019B Fire and Explosion Prevention
PS Workshop 3: CHE6011A Designing and Engineering for Safe Operations: Runaway Reactions and Dust Handling
PS Workshop 4: PHE3019C Relief Systems: Types, Characteristics and Design Considerations
PS Workshop 5: CHE6011B Process Hazard Analysis
PS Workshop 6: CHE6011C Layer of Protection Analysis (LOPA)
PS Workshop 7: CHE6020A The Human Factor in Process Safety
PS Workshop 8: CHE6020B Quantitative Risk Analysis

Participants who successfully obtain all 8 Certificate of Attainment in the Process Safety series will receive an SIT Specialist Certificate in Process Safety.

Key Info

Venue SIT@Dover, 10 Dover Drive S138683
Time 09:00 AM to 06:00 PM
Date 16 Sep 2021 (Thu) to
17 Sep 2021 (Fri)
Registration Closing on: 26 Aug 2021
Apply Now

You May Also Like