SITizens Learning Credits

Overview

Students will learn advanced design knowledge and skills in designing flat slab and irregular slab systems, slender columns, and non-flexural members such as deep beams, corbels, dapped beams and beams with openings. This module will also provide students with the latest knowledge and recent development in precast concrete structures. Topics covered in Precast Technology include Materials and production; frames, components and connections; design of skeletal frames; composite construction; design of precast floors; joints and connections; structural integrity; handling, transportation and erection.

Teaching Team

What You’ll Learn

Design of flat slabs
  • Hand calculations and FEA analysis will be used to analyse complex two way spanning flat slab systems. The results of the analyses will be used to design the elements.
Slender columns
  • Principles of second order analyses will be applied to the design of slender concrete columns.
Continuous beams
  • The analysis of continuous beams will be covered, including both hand calculations and FEA methods. The design method, including moment redistribution will be covered following this.
Design of Post Tensioned members
  • Analysis and design of post tensioned members, including beams and slabs. Construction methods will also be reviewed.
Design of Pre Tensioned members
  • Analysis and design of pre-tensioned members, including long span girders. Fabrication methods will be considered.

Who Should Attend

  • Civil Engineers, Site Engineers, Field Engineers, Project Engineers
  • Construction Managers

SITizens Learning Credits (SLC) - Eligible Course

This course is SITizens Learning Credits (SLC) eligible. Please refer to the user guide how to register for courses utilising your SLC.

Find out more about SITizens Learning Credits (SLC).


Certificate and Assessment

A Certificate of Participation will be issued to participants who:
  • Attend 75% of the course
  • Undertake non-credit bearing assessment (during course)

A Certificate of Attainment for each module will be issued to participants who:

  • Attend at least 75% of each respective module; and
  • Participants who pass the Continuous Assessment and final examination with with a GPA of 2.5 or more.
 

Prerequisites

  • Candidate should possess a bachelor degree in Civil Engineering
 

Frequently Asked Questions

  • What is the prerequisite knowledge for the course?

Students should be familiar with basic concrete design to EC2, such as the methods to design simple flexural and compression elements.

  • Is any software required for the software?
Any analysis software used will be provided as part of the course.

Schedule

Week 
Activity Type Topics
1-2 Lecture/tutorial Slab Design by Yield-Line method and Strip method; Design of flat slabs
3-4 Lecture/tutorial Design of irregular slab systems and slender columns
5-6 Lecture/tutorial Design of continuous beams with redistribution of moments; Non-flexural members
7 - BREAK
8-9 Lecture/tutorial General principles of prestressed design; Basic codes and analysis methods
10-11 Lecture/tutorial Post tensioned members design; Design of beams and slabs; Construction techniques and issues
12-13 Lecture/tutorial Pre tensioned members design; Design of bridge girders; Construction techniques and issues

Fees

 
Category Full Fee After SF Funding
Singapore Citizen (Below 40) /
Singapore PR
$3,482.85 $1,044.86
Singapore Citizen (40 & above) $3,482.85 $393.86
Non-Singaporeans $3,482.85 Not Eligible
Note:
  • All figures include GST. GST applies to individuals and Singapore-registered companies.
  • You can opt for either SkillsFuture Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.

Learn more about funding types available

Terms & Conditions:

SkillsFuture Funding

To be eligible for the 70% training grant awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1. Be a Singaporean Citizen or Singapore Permanent Resident
  2. Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SkillsFuture Mid-Career Enhanced Subsidy

To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1. Be a Singaporean Citizen
  2. Be at least 40 years old
  3. Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.

SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.

Course Series

Modular Certification Courses - Civil Engineering

These modules are stackable towards a Postgraduate Certificate in Civil Engineering or can be taken individually as a single module as follows:

Modules

  • CVE6001 Structural Stability and Dynamics
  • CVE6002 Design of Steel and Composite Structures
  • CVE6003 Design of Tall Buildings*
  • CVE6004 Advanced Material Technology
  • CVE6005 Design of Reinforced and Precast Concrete Structures*
  • CVE6006 Advanced Geotechnical Engineering
  • CVE6007 Shallow and Deep Foundation*
  • CVE6008 Numerical Modelling in Geotechnics*
  • CVE6009 Deep Excavation and Tunnelling*
  • CVE6010 Land Reclamation and Ground Improvement
*Modules subsidised by SkillsFuture Singapore.

Each module carries ECTS 6 credits. Candidates who pass any 4 modules (totalling 24 credits) with a CGPA of 2.5 or more will be awarded the Postgraduate Certificate in Civil Engineering by SIT. Collectively, they can be taken as the Masters of Science in Civil Engineering.

SITizens Learning Credits

Key Info

Venue SIT@Dover, 10 Dover Drive S138683
Time 07:00 PM to 10:00 PM
Date 10 May 2022 (Tue) to
21 Aug 2022 (Sun)
Registration is Closed.

You May Also Like