Overview

A water and wastewater treatment plant has a suite of unit operations and processes. Holistically, a total solution comprises of, Pre-treatment, Primary treatment, Secondary treatment, and Biosolids Handling.

This 1-day course focuses on Pre-treatment technology.
In the Oil and Gas industry, the Pre-treatment operation could include:
(1a) Separation by Gravity,
(1b) Chemical Pre-treatment
(1c) Heat Addition.

In water/wastewater industry, it could be:
(1d) Screens, 
(1e) Grit/Grease removal
(1f) Balancing tank.
This course also focus on Dissolved Air Floatation (DAF), Corrugated Plate Interceptor (CPI), Induced Gas Floatation (IGF) separators and the clarifier/sedimentation tank. Once Pre-treatment is designed correctly and adequately, designers can have a peace of mind in all downstream processes.

The course will also look into the different feed water qualities of Produced Water and Water/Wastewater as design basis and use several design software for hands-on practices.The course will also touch on engineering design guidelines (in addition to functional requirements) which is good for any practicing or facility engineers and managers.

Teaching Team

What You’ll Learn

  • Understand and interpret properties of different feed water quality during design
  • To be able to perform the basic design of Dissolved Air Floatation (DAF) Separator, Induced Gas Flotation (IGF) Separator, Corrugated Plate Interceptor (CPI) Separator, and Primary/Secondary Clarifier, for water and wastewater treatment industry; < Detention Time, Surface Overflow Rate, Weir Loading and Organic Loading Rate, Oil Content, Oil Droplet Size, Viscosity, Water Density, etc >
  • To able to calculate and apply the important process design parameters, such as feed flow rate, temperature, pressure, and water-oil-solids density, viscosity and concentration differences.
  • To be able to size and design Oil-Water Separator, DAF Separator, IGF Separator, and rectangular and circular clarifiers. < To evaluation suitable equipment >.

Who Should Attend

  • Water / Wastewater Treatment Engineers and Managers;
  • Produced Water Treatment Engineers and Managers;
  • Process Engineers and Managers in the water and wastewater industry;
  • Process Engineers and Managers in the oil & gas industry;
  • Maintenance and Facilities Engineers and Managers in the water and wastewater treatment companies and plants;
  • Sales Engineers and Managers of water and wastewater treatment products and process technologies;
  • Instructional Trainers/Educators in the water and wastewater treatment processes.

Prerequisites

  • Familiar with MS Office especially Microsoft Excel.
  • Familiar with water chemistry.
  • Good to have at least seen a water/wastewater treatment plant.

SITizens Learning Credits (SLC) - Eligible Course

SIT Alumni: Before registering for courses, please activate your SITizens Learning Credits via the email sent by SIT Alumni Team, on behalf of SITLEARN Professional Development.

CLICK HERE TO APPLY (only for SIT Alumni)

 

Certificate and Assessment

A Certificate of Participation will be issued to participants who:
  • Attend 75% of the course
  • Undertake non-credit bearing assessment (during the course)

Schedule

Welcome and Registration
Topic 1: Water & Wastewater Chemistry
Topic 2: Introduction to Wastewater Treatment (Typical Unit Processes, Process Flow Chart)
Tea Break
Topic 3: Introduction to Water Treatment (Typical Unit Processes, Process Flow Chart, etc.)
Topic 4: Practical Hands-on Design I and II
Lunch
Topic 5: Produced Water Chemistry
Topic 6: Introduction to Produced Water Treatment (Typical Unit Processes, Process Flow Chart, etc.)
Tea Break
Topic 7: Practical Hands-on Design III
Topic 8: Practical Hands-on Design IV
Assessment / Group Presentation / Q&A
End of Day

Fees

Category Full Fee After SF Funding After SF Mid-Career
Enhanced Subsidy
Singapore Citizen (Below 40) / Singapore PR $749.00 $224.70 Not Eligible
Singapore Citizen (40 & above) $749.00 $224.70 $84.70
Non-Singaporeans $749.00 Not Eligible Not Eligible

Note:
  • All figures include GST. GST applies to individuals and Singapore-registered companies.
  • You can opt for either SkillsFuture Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.

» Learn more about funding types available

Terms & Conditions:

SkillsFuture Funding

In order to be eligible for the 70% training grant awarded by SkillsFuture, applicants (and/or their sponsoring organisations where applicable) must:
  1.  Be a Singaporean Citizen or Singapore Permanent Resident
  2.  Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SkillsFuture Mid-Career Enhanced Subsidy

To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1.  Be a Singaporean Citizen
  2.  Be at least 40 years old
  3.  Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.

Key Info

Venue SIT@Dover, 10 Dover Drive S138683
Time 09:00 AM to 06:00 PM
Date 21 Aug 2020 (Fri)
Registration Closing on: 31 Jul 2020
Apply Now

You May Also Like