SITizens Learning Credits


This module provides participants with in-depth knowledge, skills and competency in the modelling, simulation and data analysis of electrical power systems. This is essential for the effective, safe and stable operation of modern utility grid with growing penetration of renewables, distributed energy resources and power electronic control devices. Transient simulation and analysis of power system networks of transmission lines, cables, circuit breakers, transformers, electrical machines and power converters are emphasized. Solid-state power system stability compensating devices and technologies are also introduced. The course is delivered in a technology-enable learning mode using industry-standard electromagnetic transient simulation software such as PSCAD.

Teaching Team

What You’ll Learn

Simulation Techniques and Software for Power Systems
  • Nodal analysis in electric circuits
  • Steady-state and transient simulations
  • Electromagnetic Transient Program (EMTP)
  • Transient Analysis Control System (TACS)
  • Visualization

Modelling of Fundamental Power Grid Components

  • Common models in EMTP and ETAP
  • Overhead transmission lines
  • Underground cables
  • Single-phase two and three winding transformers
  • Three-phase transformer
  • Inrush currents

Transient Analysis of Current Breaking and Arcs in Protection Devices

  • Short circuit current breaking
  • Capacitive current breaking Inductive current breaking
  • Transient recovery voltages
  • Mayr and Cassie arc models
  • Current zero skipping

Transient Analysis of Power Electronic Equipment and Controls in Modern Grids

  • HVDC inverter/converter circuits
  • Static VAR compensator
  • Thyristor-controlled inductor
  • PWM self-commutated inverters
  • Static VAR generator
  • Dynamic voltage restorer

Simulation and Analysis of Electrical Machine Dynamics in Power Systems

  • Electrical machine models and parameters
  • Synchronous machines
  • Induction machines
  • Doubly-Fed machines
  • Permanent-magnet machines
  • Mechanical torque loads

Transient Stability Analysis, Control and Enhancement

  • Classic analysis and time-domain analysis
  • Field excitation control
  • Doubly-fed flywheel generator for stability enhancement
  • Line-start and power electronic-controlled starting

Dementia Workshop

Who Should Attend

  • Engineers working in power and energy sector;
  • Railway electrical power supply and propulsion professionals;
  • Electrical and electronic engineering professionals;
  • Researchers and educators in electrical engineering and urban sustainability-related areas

SITizens Learning Credits (SLC) - Eligible Course

This course is SITizens Learning Credits (SLC) eligible. Please refer to the user guide how to register for courses utilising your SLC.

Find out more about SITizens Learning Credits (SLC).


  • Bachelor degree in Engineering
  • At least one year of relevant working experience

Assessment and Certification

A Certificate of Participation will be issued to participants who:

  • Attend 75% of the module
  • Undertake the Continuous Assessment
A Certificate of Attainment will be issued to participants who:
  • Attend at least 75% of the programme, and
  • Participants who pass the Continuous Assessment and Exam Paper will earn 6 ECTS credits, which are stackable for PGCert or MSc qualifications.

Continuing Professional Development

This module is eligible for the following continuing professional development units:  

Frequently Asked Questions

What coding skills do I need for this module?

No specific skills are required for this module. A basic engineering degree and relevant working experience are sufficient to pick up the knowledge and skills in modelling, simulation and analysis of electrical power systems.

How are the SIT postgraduate EPE modules different from other postgraduate courses in power engineering offered elsewhere?

Other postgraduate courses offered elsewhere usually focus primarily on theories of power engineering, targeted at research-intensive outcomes. Our applied learning and training instead places equal emphasis on theoretical knowledge and practical training for industries in using state-of-the-art simulation and analysis tools. The curriculum is developed in alignment with the National Energy Competency Framework launched by EMA in June 2015.


Date Time Venue
29 Aug - 4 Dec 2022  Every Monday, 7pm - 10pm  SIT@Dover, 10 Dover Drive S138683


Category Full Fee After SF Funding
Singapore Citizen (Below 40) / Singapore PR / LTVP+ Holder $3,540.69 $1,062.21
Singapore Citizen (40 & above) $3,540.69 $400.40
Non-Singaporeans $3,540.69 Not Eligible

  • All figures include GST. GST applies to individuals and Singapore-registered companies.
  • You can opt for either SF Series Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.

» Learn more about funding types available

Terms & Conditions:

SkillsFuture Funding
To be eligible for the 70% training grant awarded by SkillsFuture, applicants (and/or their sponsoring organisations where applicable) must:
  1.  Be a Singaporean Citizen, Singapore Permanent Resident or LTVP+ Holder
  2.  Not receive any other funding from government sources in respect of the actual grant disbursed for the programme

SkillsFuture Mid-Career Enhanced Subsidy To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
  1.  Be a Singaporean Citizen
  2.  Be at least 40 years old
  3.  Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.

SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.

What Industry Experts Say?

“Applying power system analysis techniques to industrial and commercial power systems
As computer technology has advanced, so has the complexity of industrial and commercial power systems. These power systems have grown in recent decades with capacities far exceeding that of a small electric utility system. Today’s intensely competitive business environment forces plant or building management personnel to be very aware of the total owning cost of the power distribution system. Therefore, they demand assurances of maximum return on all capital investments in the power system. The use of digital computers makes it possible to study the performance of proposed and actual systems under many operating conditions. Answers to many questions regarding impact of expansion on the system, short-circuit capacity, stability, load distribution, etc., can be intelligently and economically obtained.”

IEEE Standards 399-1997 (The Brown Book)

SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.

Course Series

Find out more about the Modular Certification Courses - Electrical and Electronic Engineering (EEE)

These modules are stackable towards a Postgraduate Certificate in Electrical and Electronic Engineering (PGCert EEE) or can be taken individually as a single module as follows:

  • EEE6001 Power Systems Analysis and Control
  • EEE6002 Power Electronic Conversion
  • EEE6003 Electrification for Transportation and Built Environment
  • EEE6004 Power Systems Fault Analysis and Protection
  • EEE6005 Power Quality and Reliability
  • EEE6006 Smart Grids and Cyber Security
  • EEE6007 Analysis and Design of Electrical Machine Systems
  • EEE6008 Condition Monitoring in Power Engineering
  • EEE6109 Design for Sustainability in Electrical and Electronic Engineering
  • EEE6110 Professional Practices in Electrical Engineering

Each module carries 6 ECTS credits which are stackable for graduate qualification of PGCert EEE. Candidates who pass any of the above 4 modules (totalling 24 credits) with a CGPA of 2.5 or more will be awarded the Postgraduate Certificate in Electrical and Electronic Engineering (PGCert EEE) by SIT. All the above modules are subsidised by SkillsFuture Singapore. Eligible individual may enjoy up to a maximum of 5 subsidised modules.

The above modules have been renamed from EPE60XX to EEE60XX for modules starting from Sep 2019. There is otherwise no change in stackability towards the Postgraduate Certificate in Electrical and Electronic Engineering (PGCert EEE)

SITizens Learning Credits

Key Info

Venue SIT@NYP, 172A Ang Mo Kio Avenue 8, S567739
Time 07:00 PM to 10:00 PM
Date 29 Aug 2022 (Mon) to
28 Nov 2022 (Mon)
Registration is Closed.

You May Also Like