Overview
This 3-day course will provide participants with a comprehensive understanding of basic Electromagnetic Compatibility (EMC) knowledge including electromagnetic fundamentals, international standards requirements, trends, essential measurement methods and principles of EMC troubleshooting. This course aims to upgrade the skill sets of participants as well as to improve effectiveness in the areas of EMC testing operations, product EMC design and debugging.
To aid companies in transforming their capabilities through their human capital, and support Singapore’s drive towards becoming a Smart Nation, this course is mapped to the Singapore Economic Development Board’s Singapore Smart Industry Readiness Index:
- Dimension 7 - Shop Floor Connectivity
- Dimension 8 - Enterprise Connectivity
- Dimension 9 - Facility Connectivity
What You’ll Learn
Topic 1: Fundamental Concepts- Decibels, Phasor, Signals and Spectra, Electromagnetic Waves, Maxwell’s Equations, Material Properties, R, L and C
Topic 2: Transmission Lines- Transmission Line Theory, High-Speed Digital, TDR, Signal Integrity, Cross-Talk, Even-mode and Odd-mode, Single-Ended and Differential Signaling
Topic 3: Fundamentals of EMI (interference) Testing- Introduction of EMI testing, international standards and updates.
Topic 4: Fundamentals of EMS (immunity) Testing- Introduction of EMS testing, international standards and future trends.
Topic 5: EMC in Printed Circuit Boards- Common-mode generation in Differential Signaling, Common-mode rejection, Case Studies, Decoupling capacitors, Stack-ups and Layout Techniques and Shielding Techniques
Topic 6: Printed Circuit Board EMI Analysis (with demo)- Practical PCB EMI issue analysis using a spectrum analyser and oscilloscope
Who Should Attend
- Practising Engineers from Assistant Engineers to Principal Engineers who are involved in the design, development, and production and EMC compliance testing of electronic devices and systems;
- Engineers who require working knowledge of EMI/EMC/SI effects such as circuit designers, PCB layout engineers, and mechanical designers;
- Technical staff and product managers who wish to upskill their knowledge in EMI/EMC
SITizens Learning Credits (SLC) - Eligible Course
SIT Alumni: Before registering for courses, please activate your SITizens Learning Credits via the email sent by SIT Alumni Team, on behalf of SITLEARN Professional Development on 31 Jan 2019.
CLICK HERE TO APPLY (only for SIT Alumni)
Registration closes on 22/03/19
Prerequisites
- Basic knowledge of electrical/electronic circuits
- Basic knowledge of complex numbers
Certificate and Assessment
A Certificate of Participation will be issued to participants who:
- Attend 75% of the course, and
- Complete an online assessment towards the end of the course
Schedule
Day 1
| Time |
Topic |
| 8:30 am |
Welcome and Registration |
| 9:00 am |
Topic 1: Fundamental Concepts |
| 10:30 am |
Tea Break |
| 11:00 am |
Topic 1: Fundamental Concepts |
| 12:30 pm |
Lunch |
| 2:00 pm |
Topic 2: Transmission Lines |
| 3:30 pm |
Tea Break |
| 4:00 pm |
Topic 2: Transmission Lines |
| 5:30 pm |
Summary/ Quiz/ Q&A |
| 6:00 pm |
End of Day 1 |
Day 2
| Time |
Topic |
| 9:00 am |
Topic 3: Fundamental of EMI (Interference) testing |
| 10:30 am |
Tea Break |
| 11:00 am |
Topic 3: Fundamental of EMI (Interference) testing |
| 12:30 pm |
Lunch |
| 2:00 pm |
Topic 4: Fundamental of EMI (Immunity) testing |
| 3:30 pm |
Tea Break |
| 4:00 pm |
Topic 4: Fundamental of EMI (Immunity) testing |
| 5:30 pm |
Summary/ Quiz/ Q&A |
| 6:00 pm |
End of Day 2 |
Day 3
| Time |
Topic |
| 9:00 am |
Topic 5: EMC in Printed Circuit Boards |
| 10:30 am |
Tea Break |
| 11:00 am |
Topic 5: EMC in Printed Circuit Boards |
| 12:30 pm |
Lunch |
| 2:00 pm |
Topic 6: Printed Circuit Board EMI Analysis (with demo) |
| 3:30 pm |
Tea Break |
| 4:00 pm |
Topic 6: Printed Circuit Board EMI Analysis (with demo) |
| 5:30 pm |
Summary/ Assessment |
| 6:00 pm |
End of Day 2 |
Fees
| Category |
Full Fee |
After SF Funding |
After SF Mid-Career
Enhanced Subsidy |
| Singapore Citizen (Below 40) / Singapore PR |
$2,568.00 |
$770.40 |
Not Eligible |
| Singapore Citizen (40 & above) |
$2,568.00 |
$770.40 |
$290.40 |
| Non-Singaporeans |
$2,568.00 |
Not Eligible |
Not Eligible |
Note:
- All figures include GST. GST applies to individuals and Singapore-registered companies.
- You can opt for either SF Series Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.
»
Learn more about funding types available
Terms & Conditions:
SkillsFuture Funding
In order to be eligible for the 70% training grant awarded by SkillsFuture, applicants (and/or their sponsoring organisations where applicable) must:
- Be a Singaporean Citizen or Singapore Permanent Resident
- Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SkillsFuture Mid-Career Enhanced Subsidy
To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
- Be a Singaporean Citizen
- Be at least 40 years old
- Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.
SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.
