Overview
The course aims to enhance participant’s understandings of Eurocode 3 (EC3) design provisions, in particular for high strength steel structures using Grade S460 steel and beyond. The course will also draw lessons learned from case studies and collapse investigations to strengthen participant’s understandings of EC3 design concepts and how to avoid common mistakes in steel design.
What You’ll Learn
- Understand the basic design concepts in Eurocode 3
- Understand the difference between design of normal strength and high strength steel structures
- Understand the differences between BS5950 and Eurocode 3
- Migrate from BS5950 to Eurocode 3 design with ease
Who Should Attend
- Practitioners in civil engineering
- Site Engineer
- Field Engineer
- Project Engineer
- Construction managers
- Related disciplines in building and construction sectors
SITizens Learning Credits (SLC) - Eligible Course
SIT Alumni: Before registering for courses, please activate your
SITizens Learning Credits via the email sent by SIT Alumni Team, on behalf of SITLEARN Professional Development.
Registration Closed.
Prerequisites
- Diploma/Degree in civil Engineering or related discipline
Certificate and Assessment
An SITLEARN Certificate of Participation will be issued to participants who:
- Attend at least 75% of the course
- Undertake non-credit bearing assessment during the course
Continuing Professional Development
This course is eligible for the following continuing professional development units:
Schedule
Day 1
Session 1 |
Topics |
9:30am – 12:30pm |
Overview of Eurocode 3, migrating from BS5950 to EC3. Material selection & Quality control to comply with BC 1, Imperfections and Structural Analysis. Case Studies. |
Day 2
Session 2 |
Topics |
9:30am – 12:30pm |
Cross Section Resistances ( Bending, Tension, Compression including Resistance to Transverse Force, Member Buckling Resistances ( Column, Beam, Beam-Column) and Shear Buckling Resistance ( Plate Girder). |
Day 3
Session 3 |
Topics |
9:30am – 12:30pm |
Design of Bolted and Welded Connections, Structural Hollow Sections Joints to EC3-1-8. |
Day 4
Session 4 |
Topics |
9:30am – 12:30pm |
Design of High Strength Steel Structures to EN1993-1-12 Additional Rules for the Extension of EN1993 up to Grade S700. Case Studies. Course Assessment. |
Fees
Category |
Full Fee |
After SF Funding |
After SF Mid-Career
Enhanced Subsidy |
Singapore Citizen (Below 40) /
Singapore PR |
$1,284.00 |
$385.20 |
Not Eligible |
Singapore Citizen (40 & above) |
$1,284.00 |
$385.20 |
$145.20 |
Non-Singaporeans |
$1,284.00 |
Not Eligible |
Not Eligible |
Note:
- All figures include GST. GST applies to individuals and Singapore-registered companies.
- You can opt for either SkillsFuture Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.
»
Learn more about funding types available
Terms & Conditions:
SkillsFuture Funding
To be eligible for the 70% training grant awarded, applicants (and/or their sponsoring organisations where applicable) must:
- Be a Singaporean Citizen or Singapore Permanent Resident
- Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SkillsFuture Mid-Career Enhanced Subsidy
To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
- Be a Singaporean Citizen
- Be at least 40 years old
- Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.
SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.