SIT alumni (SITizens) are eligible to receive SITizens Learning Credits of SGD2,000 as long as they have graduated with a degree from any of the undergraduate programmes offered by:
(a)
Singapore Institute of Technology.
(b)
Joint degree by Singapore Institute of Technology and Overseas University partner.
(c)
One of Singapore Institute of Technology’s Overseas University partners.
2 Usage
2.1
The SITizens Learning Credits can be used from 1 April 2019 to 31 March 2024.
2.2
SITizens can use the SITizens Learning Credits to apply for eligible standalone courses offered by SITLEARN Professional Development. The list of eligible standalone courses can be found at www.sitlearn.edu.sg and will be updated from time to time.
2.3
SITizens Learning Credits can only be used for self-sponsored course applications.
2.4
SITizens are not eligible for any form of discount(s) namely, early bird, members’ discount etc, offered by SITLEARN Professional Development if SITizens Learning Credits are used for course application.
2.5
Acceptance of payment by SITizens Learning Credits is at the sole discretion of Singapore Institute of Technology.
2.6
SITizens Learning Credits cannot be exchanged for cash or be transferred to another person.
2.7
SITizens Learning Credits may be used to pay for SkillsFuture-funded courses offered by SITLEARN Professional Development. However, acceptance of payment by SITizens Learning Credits for such SkillsFuture-funded courses is at the sole discretion of SITLEARN Professional Development. SITizens are to note that the SkillsFuture funding is also subject to eligibility criteria set by SkillsFuture Singapore.
2.8
All course applications using SITizens Learning Credits will be subject to the terms and conditions of course registration, which are stipulated at the point of registration.
2.9
In the event that SIT cancels the course after the course application is accepted, SIT will make full refund of SITizens Learning Credits that were used for payment.
3 Balance Payments
3.1
Each successful course application paid fully or partially by the SITizens Learning Credits will be subject to a non-refundable administrative fee of SGD 40 and GST at the prevailing rate (total SGD 42.80). This non-refundable administrative fee must be paid online by credit card or debit card or internet banking.
3.2
SITizens shall pay any balance course fees online by credit card or debit card or internet banking (or other payment mode acceptable by SIT) if the SITizens Learning Credits have been fully used.
3.3
SITizens are to note that for SkillsFuture-funded courses offered by SITLEARN Professional Development, SkillsFuture Credit (SFC) cannot be used to offset administrative fee and withdrawal charges. Such administrative fees and withdrawal charges must be paid online by credit card or debit card or internet banking. Please refer to the terms and conditions for SFC on the SkillsFuture website when using SFC for courses.
4 Use of Personal Data
4.1
SIT may collect, use and disclose personal data that a SITizen provides during the activation of SITizens Learning Credits for the following purposes:
4.1.1
Inviting the applicant to future events and online surveys relating to SITizens Learning Credits.
4.1.2
Informing the applicant of any news, information, and promotions relating to SITizens Learning Credits.
4.1.3
For the use of any online services available at any SIT’s websites and/or through other telecommunications channels relating to SITizens Learning Credits.
4.1.4
Applicants may withdraw their consent for one or more of the above purposes at any time by informing SIT.
4.2
For any questions, please contact SIT’s personal data protection officer at dpo@singaporetech.edu.sg.
SIGNIN REQUIRED
Please sign in using one of the below methods to continue.
I confirm that all information provided is accurate, and that I have read and accepted SIT's terms and conditions, including the section on
"Use of Personal Data". *
RF and wireless systems are one of the key enabling technology for next-generation intelligent transportation systems (ITS), ranging from Vehicle to infrastructure (V2X) communication systems to Advanced Driver Assistance Systems (ADAS) and satellite navigation systems. The RF/Microwave electronics industry is evolving rapidly to meet the requirements of a variety of applications leading to robust ITS. The electronics industries, as they evolve in this sector, while adapting from previous generation digital electronics to advanced RF electronics, are having needs to equip their engineers with fundamental principles of RF and microwave engineering.
This intermediate-level course aims to make this transition of the practising engineers, by exposing them to the concepts in RF engineering essential for design, fabrication, system integration and testing of RF systems. The course introduces the fundamentals, enforcing basic knowledge necessary for understanding operation and design principles in a typical RF system. Distributed effects in a transmission line and transition from tradition voltage and current waves to power-waves in the form of Scattering parameters will be introduced. Techniques for Impedance Matching and visualizing using Smith Chart will be covered. Transmission line types and effects critical for PCB design especially for high-frequency operation will be covered. Finally, essential topics on antennas, their radiation characteristics and related propagation effects will be covered. The course will cover relevant examples using appropriate design and simulation tools where applicable.
To aid companies in transforming their capabilities through their human capital, and support Singapore’s drive towards becoming a Smart Nation, this course is mapped to the Singapore Economic Development Board’s Singapore Smart Industry Readiness Index:
Dimension 7 - Shop Floor Connectivity
Dimension 8 - Enterprise Connectivity
Dimension 9 - Facility Connectivity
Teaching Team
What You’ll Learn
Topic 1: Introduction
Frequency Spectrum, Review of Complex Numbers, Units, Wave Characteristics.
Topic 2: Impedance and Transmission Line Theory
Lumped Circuit Elements (R, L and C), Complex Impedance, Transmission Line Theory, VSWR, Reflection Coefficient, Smith-Chart
Topic 3: S-parameters
Network Parameters including Impedance, Admittance, ABCD and Scattering parameters, Vector Network Analyzer and Measurement of S-parameters
Topic 4: Impedance Matching
LC Resonance, Q Matching, Matching Network and Smith Chart
Topic 5: Transmission Lines
Coaxial Cables, Microstrip Lines, Striplines, Multilayered PCB and Via-hole Effects
Topic 6: Antennas and Propagation
EM Radiation, Types of antennas, Antenna design, Performance parameters and measurements, propagation models and path-loss calculations.
Antennas - Friis Transmission Equation
SmithChart - Introduction
Who Should Attend
Practising Engineers from Assistant Engineers to Principal Engineers who are involved in the design, development, and production and testing of RF/Wireless components, circuits, sub-systems, and systems
Technical Staff and Product Managers who wish to upskill their knowledge in RF systems
SITizens Learning Credits (SLC) - Eligible Course
This course is SITizens Learning Credits (SLC) eligible. Please refer to the user guide how to register for courses utilising your SLC.
In order to be eligible for the 70% training grant awarded by SkillsFuture, applicants (and/or their sponsoring organisations where applicable) must:
Be a Singaporean Citizen or Singapore Permanent Resident
Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SkillsFuture Mid-Career Enhanced Subsidy
To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
Be a Singaporean Citizen
Be at least 40 years old
Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.
SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.