Overview
Designing and Engineering for Sale Operations is a 2-day workshop specially developed to help process engineers, operators, safety personnel and management ensure safer working conditions at major hazard installations, with an emphasis on runway reactions and dust handling.
In this practical workshop, you will be introduced to techniques for analysing and mitigating process safety hazards. Throughout the course, frequent reference will be made to historical process incidents that serve to illustrate what happens when process safety principles are not fully understood or complied with.
By end of the workshop, you will be able to:
- Recognise the types of equipment and process systems that have historically been problematic in major hazard installations
- Understand detection and mitigation methods for different types of hazards
- Think in terms of inherently safer design
What You’ll Learn
- Problems and Characteristics of Chemical Runaway Reaction
- Chemical Reaction Hazards and Assessment
- Selecting and Specifying a Basis of Safety to Design and Operate Chemical Reactor Process
- Management of Chemical Processes
- Importance of Inherently Safer Design Concept
- Common Hazards Associated with Process Plant to Avoid
- Start-up and Shutdown Procedures
- Combustible Dust Explosion
- Electrical Safety
Who Should Attend
Managers, engineers, operators, safety advisors and risk management practitioners.
SITizens Learning Credits (SLC) - Eligible Course
SIT Alumni: Before registering for courses, please activate your
SITizens Learning Credits via the email sent by SIT Alumni Team, on behalf of SITLEARN Professional Development.
CLICK HERE TO APPLY (only for SIT Alumni)
Certificate and Assessment
A Certificate of Participation will be issued to participants who
- Attend 75% of the workshop, and
- Sit for short quizzes during the workshop
A Certificate of Attainment will be issued to participants who:
- Attend 75% of the worlshop, and
- Sit for short quizzes during the workshop, and
- Submit a written portfolio within 1 month of the workshop (write-up on how the participant is able to apply the materials taught in their work)
Participants who successfully obtain all 8 Certificate of Attainment in the Process Safety series will receive an SIT Specialist Certificate in Process Safety.
Continuing Professional Development
This workshop is eligible for the following continuing professional development units:
Schedule
Duration |
Venue |
2-day |
SIT@Dover, 10 Dover Drive S138683 |
Fees
Category |
Full Fee |
After SF Funding |
After SF Mid-Career
Enhanced Subsidy |
Singapore Citizen (Below 40) / Singapore PR |
$1,712.00 |
$513.60 |
Not Eligible |
Singapore Citizen (40 & above) |
$1,712.00 |
$513.60 |
$193.60 |
Non-Singaporeans |
$1,712.00 |
Not Eligible |
Not Eligible |
When applying for this course, in the "Remarks" field, please:
- Inform us if you are a registered Workplace Safety and Health Officer (WSHO) to claim SDUs.
- Provide your PE registration number if you are a Professional Engineer to claim PDUs.
Note:
- All figures include GST. GST applies to individuals and Singapore-registered companies.
- You can opt for either SkillsFuture Funding or Mid-Career Enhanced Subsidy. Both cannot be combined.
»
Learn more about funding types available
Terms & Conditions:
SkillsFuture Funding
To be eligible for the 70% training grant awarded, applicants (and/or their sponsoring organisations where applicable) must:
- Be a Singaporean Citizen or Singapore Permanent Resident
- Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SkillsFuture Mid-Career Enhanced Subsidy
To be eligible for the 90% enhanced subsidy awarded, applicants (and/or their sponsoring organisations where applicable) must:
- Be a Singaporean Citizen
- Be at least 40 years old
- Not receive any other funding from government sources in respect of the actual grant disbursed for the programme
SIT reserves the right to collect the balance of the programme fees (i.e. the potential grant amount) directly from the applicants (and/or their sponsoring organisations where applicable) should the above requirements not be fulfilled.
SIT reserves the right to make changes to published course information, including dates, times, venues, fees and instructors without prior notice.